Ghost 2 Immobiliser Problems

Designed to protect vehicles from key cloning and hacking the Ghost 2 immobiliser is a discrete device that is able to be fitted without damaging your car. It prevents you from starting your vehicle unless you press the correct sequence of buttons in your vehicle. This is similar to the mobile password.

Stop/Start

Ghost immobilisers protect vehicles from being stolen by stopping the engine from starting until it receives the right PIN code. This is done without modifying the vehicle, and is largely undetectable by thieves. The unit communicates with the ECU on the CAN data bus, which allows it to lock the vehicle. This system is very similar to the one automobile manufacturers have used in their cars for years however, the criminal can't add a new key or use key relay technology to bypass it like they could with factory-installed systems.

A Ghost can be fitted to any van, car motorhome, caravan, or bike with an engine. It is compatible with all the popular brands of vehicles. The same system can also be used on electric vehicles. It's a great alternative to steering wheel locks and wheel clamps and can be installed with little effort.

When the Ghost is armed it will block all the buttons in your vehicle and prevent the ignition from starting unless a PIN code has been entered prior to. This can be accomplished using the Android or Apple mobile app or by manually entering the code through your key fob. If the incorrect code is entered the app will display an indicator light. The Ghost will then not allow the vehicle to start again. This is a great method to discourage thieves. If the vehicle can't be started the thieves will be able to move on.

The Ghost is tiny, weatherproof device that can be hidden in the most difficult-to-access parts of your car. Installation takes between 20-30 minutes for each vehicle. It is also simple to take off if you decide to change vehicles, or to give it to a service center or valet parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) an insurance-approved system, and is recognized by certain insurance companies. It also comes with an emergency lock that is secure Pin Code Override, and a Service/Valet mode which can be activated by pressing a button in the app or by using your key fob.

Disarm

In contrast to the mechanical anti-theft devices, which are able to be removed and reinstalled, ghost immobilisers are concealed and are integrated into the car. They are near impossible to hack or bypass and even if discovered, thieves cannot start the engine. This is because ghost immobilisers prevent key blocking, signal jamming, and device spoofing, all of which are methods that are frequently used by thieves to get into cars fitted with standard immobilisers.

The immobiliser transmits a code to the ECU. If the wrong code is received and the vehicle doesn't start as the engine won't start. It is possible to disable a ghost immobiliser with an application program, but it is extremely difficult and time-consuming to accomplish this. The software must be installed and used by a authorized installer.

The Ghost immobiliser, a tiny device, is hidden within the wiring loom of your vehicle. It is invisible to the naked eyes once installed. It doesn't show up on diagnostic systems. There are no LED indicators and it isn't able to communicate with the engine through the OBD port. It communicates in silence via the CAN data loop.

The system will not allow the vehicle to start unless it receives an input PIN code that is entered by the user. This can be entered using buttons on the steering wheel or door panels, or on the centre console. This is a much safer way to safeguard your car since it doesn't require keys or a remote control.

Ghost also has a service-mode that can be turned on via the mobile application. This lets you give your keys to someone else to use for service or valet parking, without having to enter an arm-disarm sequence.

Whether your Ghost is in service mode or not, you should never attempt to remove the system on your own since it could impact your engine and cause damage. It is best to contact a TASSA-verified installer who can safely and correctly remove the system. Our newest GHOST immobilisers have a specific fingerprint QR sticker hidden in different parts of your vehicle. These are linked to our security register. If the system is removed and then sold on the blackmarket this will allow you to trace the original owner.

Anti-Hijack

The anti-hijack function is an essential feature of the Ghost Immobiliser 2. This system is a smart key that protects your car from thieves. The Ghost system will automatically turn on the hazard light and stop the car's engine when the ignition is on and the vehicle is stationary. This gives the driver or passengers enough time to press a security button (depending on the vehicle) before the system is activated and the engine is again allowed to begin.

Unlike many competitor systems that simply stop the engine once the ignition switch is turned on The Ghost system uses a special controller and timer unit that will close the fuel cut-off valve 14 when it is activated after an agreed-upon time even in the event that the ignition is switched on! The delay time should be long enough to allow the owner of the vehicle to leave the vehicle and a distance sufficient from the stalled car before the system is reactivated.

The Ghost offers an additional layer of security that prevents common hacking methods used to gain entry into modern cars like relay attacks and key range extension. The Ghost system communicates in a non-intrusive way and does not emit signals that can be snatched by thieves using RF scanning or code-grabbing technology.

The Ghost system also comes with the Service/Valet mode that allows your vehicle to be temporarily re-started and driven without the need for PIN codes. This is a great option if you park your car and only require it to be left for a short time for a few minutes, like to open the garage door or place groceries in the boot. The system will be able to exit service mode based on speed and time or via the simple PIN code input process, giving you complete security knowing that only you can utilize your vehicle!

Keyless Entry

With the increasing trend of theft of cars using contactless technology, many customers are seeking out additional security options. This is especially relevant for those who have put time or money into personalising their vehicles and own expensive or rare vehicles. Immobilisers with add-ons can be a good way to prevent this kind of theft because they will stop your vehicle from starting until the correct pin code has been entered along with your key fob.

Immobilisers are designed to intercept various vehicle circuits, including those that control the starter motor and fuel pump. They can also disable the car alarm to attract attention and scare away potential thieves.

These devices communicate with the engine control unit (ECU) via the CAN data circuit. They also they stop a burglar trying to bypass it by putting in a new ECU or using a key programmer. These immobilisers are installed in a discreet manner and leave no trace in your vehicle. They are also undetectable with the latest tools of thieves.

As opposed to other systems that require a separate app, or a tag to be worn on the person carrying it, a Ghost immobiliser is only disarmed by pressing a sequence of the existing electronic buttons on your steering wheel, door panel, and centre console, allowing you to select a customized pin sequence. The pin can easily be changed, making the device as secure as a bank card. It's also more difficult to break because it takes up to 20 presses.

Ghost also has the Valet/Service mode, which allows you to disable the system if your vehicle is to be turned over to valet parking or for service which allows it to operate within set parameters such as a 30mph speed limit which means you don't need to worry about your vehicle being driven in reckless manner. It can be activated with the original key or corresponding entry code.

This makes it the most efficient and secure aftermarket CAN immobiliser available on the market and is fully insurance-approved by Thatcham as an accessory for your car when fitted by one of our accredited installers. The Ghost 2 immobiliser comes with six QR fingerprint labels, as well as an ISR contact card with your unique QR codes, and an emergency code that is safe. They are all stored in your purse or wallet.